Mazda MAZDA6 Bedienungshandbuch PDF herunterladen (Seite 238)

8-18

Maintenance and Care

Owner Maintenance

Form No. 8S11-EA-03G

If new fluid is required frequently, consult

an Authorized Mazda Dealer.

3.0-liter engine

Inspect the fluid level at each engine oil

change. Add fluid if necessary; it does not

require periodic changing.

The level must be kept between the H and

L marks.

Visually examine the lines and hoses for

leaks and damage.

1. Park on a level surface, well off the

right-of-way, and set the parking brake

firmly.

2. Turn off the engine and allow it to cool.

3. Remove the filler cap and attached

dipstick.

4. Wipe them clean and put them back.

5. Remove again and inspect the level.

6. It must be between H and L. Add fluid

if necessary.

Don’t overfill.

If new fluid is required frequently, consult

an Authorized Mazda Dealer.

▼

Inspecting Automatic transaxle

Fluid Level

The automatic transaxle fluid level should

be inspected regularly. Measure it as

described below.

The volume of fluid changes with the

temperature. Fluid must be checked at idle

without driving at normal operating

temperature.

1. Park on a level surface and set the

parking brake firmly.

2. Idle the engine about two minutes.

Push down on the brake pedal.

3. Move the shift lever through all ranges

and set it at P.

High

Low

Tighten

Loosen

Automatic transaxle Fluid

(ATF)

•

Low fluid level causes transaxle

slippage. Overfilling can cause

foaming, loss of fluid, and transaxle

malfunction.

•

Use specified fluid (page 10-3). A

nonspecified fluid could result in

transaxle malfunction and failure.

CAUTION

J56J_8S11-EA-03G_Edition1.book Page 18 Tuesday, June 24, 2003 6:29 PM

1 2 ... 233 234 235 236 237 238 239 240 241 242 243 ... 301 302

Mazda MAZDA6 Bedienungshandbuch Seite 238

Kommentare zu diesen Handbüchern

Mazda MAZDA6 Bedienungshandbuch Seite 238

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Flachbildschirmzubehör Mazda MAZDA6