Mazda 2007 SPEED6 Bedienungsanleitung PDF herunterladen (Seite 249)

Black plate (248,1)

Booster battery

Jumper cables

Connect cables in numerical order and disconnect in reverse order.

Discharged

battery

1. Make sure the booster battery is 12 V

and that its negative terminal is

grounded.

2. If the boost er battery is in another

vehicle, don't allow both vehicles to

touch. Turn off the engine of the

vehicle with the booster battery and all

unnecessary electrical loads in both

vehicles.

3. Connect the jumper cables in the exact

sequence as in the illustration.

l

Connect one end of a cable to the

positive terminal on the discharged

battery (1).

l

Attach the other end to the positive

terminal on the booster battery (2).

l

Connect one end of the other cable

to the negative terminal of the

booster battery (3).

l

Connect the other end to a solid,

stationary, exposed metallic point

(for example, the strut mounting

bolt) away from the discharged

battery (4).

4. Start the engine of the booster vehicle

and run it a few minutes. Then start the

engine of the other vehicle.

5. When finished, carefully disconnect the

cables in the reverse order described in

the illustration.

7-16

In Case of an Emergency

Emergency Starting

Mazdaspeed6_8V77-EA-06F_Edition1 Page248

Tuesday, May 9 2006 10:45 AM

Form No.8V77-EA-06F

1 2 ... 244 245 246 247 248 249 250 251 252 253 254 ... 412 413

Kommentare zu diesen Handbüchern

Keine Kommentare