Mazda 2009 6 Bedienungsanleitung PDF herunterladen (Seite 333)

Black plate (333,1)

To install the nut

1. Place the key on top of the nut, and be

sure to hold the key square to it. If you

hold the key at an angle, you may

damage both key and nut. Don't use a

power imp act wrench.

2. Place the lug wrench on top of the key,

apply pressure, and turn it clockwise.

qMounting the Spare Tire

1. Remove dirt and grime from the

mounting surfaces of the wheel and

hub, inclu ding the hub bolts, with a

cloth.

WARNING

Make sure the mounting surfaces of

the wheel, hub and lug nuts are clean

before changing or replacing tires:

When changing or replacing a tire,

not removing dirt and grime from the

mounting surfaces of the wheel, hub

and hub bolts is dangerous. The lug

nuts could loosen while driving and

cause the tire to come off, resulting in

an accident.

2. Mount the spare tire.

3. Install the lug nuts with the beveled

edge inward; tighten them by hand.

WARNING

Do not apply oil or grease to lug nuts

and bolts and do not tighten the lug

nuts beyond the recommended

tightening torque:

Applying oil or grease to lug nuts and

bolts is dangerous. The lug nuts

could loosen while driving and cause

the tire to come off, resulting in an

accident. In addition, lug nuts and

bolts could be damaged if tightened

more than necessary.

4. Turn the lug wrench counterclockwise

and lower the vehicle. Use the lug

wrench to tighten the nuts in the order

shown.

In Case of an Emergency

Flat Tire

7-9

Mazda6_8Z64-EA-08H_Edition1 Page333

Wednesday, June 25 2008 10:5 AM

Form No.8Z64-EA-08H

1 2 ... 328 329 330 331 332 333 334 335 336 337 338 ... 463 464

Kommentare zu diesen Handbüchern

Keine Kommentare