Mazda 2009 6 Bedienungsanleitung PDF herunterladen (Seite 47)

Black plate (47,1)

2. Secure the child-restraint system with

the lap portion of the lap/shoulder belt.

See the manufacturer's instructions on

the child-restraint system for belt

routing instructions.

3. To get the retractor into the automatic

locking mode, pull the shoulder belt

portion of the seat belt until the entire

length of the belt is out of the retractor.

4. Push the child-restraint system firmly

into the vehicle seat. Be sure the belt

retracts as snugly as possible. A

clicking noise from the retractor will be

heard during retraction if the system is

in automatic locking mode. If the belt

does not lock the seat down tight,

repeat the previous step and also this

one.

NOTE

l

Inspect this function before each use of the

child-restraint system. You should not be

able to pull the shoulder belt out of the

retractor while the system is in the

automatic locking mode. When you remove

the child-restraint system, be sure the belt

fully retracts to return the system to

emergency locking mode before occupants

use the seat belts.

l

Follow the child-restraint system

manufacturer's instructions carefully.

Depending on the type of child-restraint

system, it may not employ seat belts which

are in automatic locking mode.

5. Make sure the front passenger air bag

deactivation indicator light illuminates

after installing a child-restraint system

on the front passenger seat.

Refer to Front passenger air bag

deactivation indicator light on page

2-47.

Essential Safety Equipment

Child Restraint

2-35

Mazda6_8Z64-EA-08H_Edition1 Page47

Wednesday, June 25 2008 10:3 AM

Form No.8Z64-EA-08H

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 463 464

Kommentare zu diesen Handbüchern

Keine Kommentare