Mazda MAZDA5 Bedienungshandbuch PDF herunterladen (Seite 389)

Black plate (389,1)

CAUTION

Ø Do not use steel wool, abrasive

cleaners, or strong detergents

containing highly alkaline or

caustic agents on chrome-plated

or anodized aluminum parts. This

may damage the protective

coating; also, clean ers and

detergents may discolor or

deteriorate the paint.

Ø To prevent damaging the antenna,

remove it before entering a car

wash facility or passing beneath a

low overhead clearance.

Pay special attention to removing salt,

dirt, mud, and other foreign material from

the underside of the fenders, and make

sure the drain holes in the lower edges of

the doors and rocker panels are clean.

Insects, tar, tree sap, bird droppings,

industrial fallout, a nd similar deposits can

damage the finish if not removed

immediately. When prompt washing with

plain wat er is ineffective, use a mild soap

made for use on vehicles.

Thoroughly rinse off all soap with

lukewarm or cold water. Do not allow

soap to dry on the finish.

After washing the vehicle, dry it with a

clean chamois to prevent water spots from

forming.

WARNING

Dry off brakes that have become wet

by driving slowly, releasing the

accelerator pedal and lightly applying

the brakes several times until the brake

per formance returns to normal:

Driving with wet brakes is

dangerous. Increased stopping

distance or the vehicle pulling to one

side when braking could result in a

serious accident. Light braking will

indicate whether the brakes have

been affected.

When using a high water pressure car

wash

High wat er temperature and high water

pressure car washers are available

depending on the type of car wash

machine. If the car washer nozzle is put

too close to the vehicle, the force of the

spray could damage or deform the

molding, affect the sealability of parts,

and allow water to penetrate the interior.

Keep a sufficient space (30 cm or more)

between the nozzle and the vehicle. In

addition, do not spend too much time

spraying the same area of the vehicle, and

be very careful when spraying between

gaps in doors and around windows.

Waxing

Your vehicle needs to be waxed when

water no longer beads on the finish.

Always wash and dry the vehicle before

waxing it. In addition to the vehicle body,

wax the metal trim to maintain its luster.

1. Use wax which contains no abrasives.

Waxes containing abrasive will remove

paint and could damage bright metal

parts.

Maintenance and Care

Appearance Care

8-59

Mazda5_8CN3-EA-12I_Edition1 Page389

Tuesday, September 4 2012 1:25 PM

Form No.8CN3-EA-12I

1 2 ... 384 385 386 387 388 389 390 391 392 393 394 ... 455 456

Kommentare zu diesen Handbüchern

Keine Kommentare