Mazda MAZDA6 Bedienungshandbuch PDF herunterladen (Seite 437)

5. Install the new bulb in the reverse order

of removal.

6. Install the coolant reservoir. If you are

unsure of how tight the bolts should be,

have them inspected at an Authorized

Mazda Dealer.

Bolt tightening torque

N·m (kgf·m, ft·lbf)

7.8―10.8

(0.8―1.1, 5.8―8.0)

NOTE

l

To replace the bulb, contact an Authorized

Mazda Dealer.

l

If the halogen bulb is accidentally touched,

it should be cleaned with rubbing alcohol

before being used.

l

Use the protective cover and carton for the

replacement bulb to dispose of the old bulb

promptly and out of the reach of children.

Low-beam bulb

(Xenon fusion bulb)

You cannot replace the low beam bulbs by

yourself.

The bulbs must be replaced at an

Authorized Mazda Dealer.

(Halogen bulbs)

1. If you are changing the right headlight

bulb, start the engine, turn the steering

wheel all the way to the right, and turn

off engine. If you are changing the left

headlight bulb, turn the steering wheel

to the left.

2. Make sure the ignition is switched off,

and the headlight switch is off.

3. Turn the screws and the center section

of the plastic retainers

counterclockwise and remove them,

then partially peel back the mudguard.

Removal

Installation

4. Turn the cover counterclockwise and

remove it.

Maintenance and Care

Owner Maintenance

8-39

Mazda6_8AS3-EA-09E_Edition1 Page437

Wednesday, May 13 2009 2:26 PM

Form No.8AS3-EA-09E

1 2 ... 432 433 434 435 436 437 438 439 440 441 442 ... 517 518

Kommentare zu diesen Handbüchern

Keine Kommentare