Mazda MAZDA6 Bedienungshandbuch PDF herunterladen (Seite 44)

2. Secure the child-restraint system with

the lap portion of the lap/shoulder belt.

See the manufacturer's instructions on

the child-restr aint system for belt

routing instructions.

3. To get the retractor into the automatic

locking mode, pull the shoulder belt

portion of the seat belt until the entire

length of the belt is out of the retractor.

4. Push the child-restraint system firmly

into the vehicle seat. Be sure the belt

retracts as snugly as possible. A

clicking noise from the retrac tor will be

heard during retraction if the system is

in the automatic locking mode. If the

belt does not lock the seat down tight,

repeat this step.

NOTE

Inspect this function before each use of the

child-restraint system. You should not be able

to pull the shoulder belt out of the retractor

while the system is in the automatic locking

mode. When you remove the child-restraint

system, be sure the belt fully retracts to return

the system to emergency locking mode before

occupants use the seat belts.

5. If your child-re straint system requires

the use of a tether strap, refer to the

manufacturer's instructions to hook and

tighten the tether strap after raising the

head restraint (except center position).

Anchor bracket location

Tether strap position

Anchor

bracket

Tether

strap

2-32

Essential Safety Equipment

Child Restraint

Mazda6_8BG6-EA-10H_Edition2 Page44

Friday, October 15 2010 5:33 PM

Form No.8BG6-EA-10H

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 521 522

Kommentare zu diesen Handbüchern

Keine Kommentare