Mazda MX-5 Bedienungshandbuch PDF herunterladen (Seite 148)

Black plate (148,1)

Starting the Engine

NOTE

Engine-starting is controlled by the spark

ignition system.

This system meets all Canadian Interference-

Causing Equipment Standard requirements

regulating the impulse electrical field strength

of radio noise.

1. Occupants should fasten their seat

belts.

2. Make sure the parking brake is on.

3. Depress the brake pedal.

4. (Manual transmission)

Depress the clutch pedal all the way

and shift into neutral.

Keep the clutch pedal depressed while

cranking the engine.

(Automatic transmission)

Put the vehicle in park (P). If you must

restart the engine while the vehicle is

moving, shift into neutral (N).

NOTE

(Manual transmission)

The starter will not operate unless the clutch is

depressed sufficiently.

(Automatic transmission)

The starter will not operate if the shift lever is

not in P or N.

5. Switch the ignition to START and hold

(up to 10 seconds at a time) until the

engine starts.

CAUTION

Do not try the starter for more than

10 seconds at a time. If the engine

stalls or fails to start, wait 10 seconds

before trying again. Otherwise, you

may da mage the starter and drain

the battery.

6. After starting the engine, let it idle for

about 10 seconds.

NOTE

l

In extremely cold weather or after the

vehicle has not been driven in several days,

let the engine warm up without operating

the accelerator.

l

Whether the engine is cold or warm, it

should be started without use of the

accelerator.

l

If the engine does not start the first time,

refer to Starting a Flooded Engine under

Emergency Starting. If the engine still does

not start, have your vehicle inspected by an

Authorized Mazda Dealer (page 7-21).

5-4

Driving Your Mazda

Starting and Driving

MX-5_8CM3-EA-12F_Edition1 Page148

Friday, June 8 2012 5:15 PM

Form No.8CM3-EA-12F

1 2 ... 143 144 145 146 147 148 149 150 151 152 153 ... 451 452

Kommentare zu diesen Handbüchern

Keine Kommentare