Mazda 8T12-EA-03K Bedienungsanleitung PDF herunterladen (Seite 137)

Black plate (137,1)

qTCS Indicator Light

This indicator light stays on for a few

seconds when the ignition switch is turned

to the ON position. If the TCS is

operating, the indicator light flashes.

If the light stays on, the TCS may have a

malfunction and it may not operate

correctly. Take your vehicle to an

Authorized Mazda Dealer.

NOTE

l

In addition to the indicator light

flashing, a slight lugging sound will

come from the engine. This indicates

that the TCS is operating properly.

l

On slippery surfaces, such as fresh

snow, it will be impossible to

achieve high rpm when the TCS is

on.

qTCS OFF Indicator Light

This indicator light stays on for a few

seconds when the ignition switch is turned

to the ON position.

It also comes on when the TCS OFF

switch is pressed and TCS is switched off.

If the light stays on when the TCS is not

switched off, take your vehicle to an

Authorized Mazda Dealer. The TCS may

have a malfunction.

NOTE

After starting the engine when the

coolant temperature is extremely low,

the TCS is automatically turned off. At

this time, the TCS OFF indicator light

will remain on, but this does not

indicate an abnormality. After the

engine has warmed, TCS will resume

normal operation and the indicator light

will go out.

qTCS OFF Switch

Press the TCS OFF switch to turn off the

TCS. The TCS OFF indicator light will

illuminate.

Press the switch again to turn the TCS

back on. The TCS OFF indicator light

will go out.

Driving Your Mazda

Starting and Driving

5-21

Mazda6_8T12-EA-03K_Edition1 Page137

Friday, December 5 2003 8:56 AM

Form No.8T12-EA-03K

1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 325 326

Kommentare zu diesen Handbüchern

Keine Kommentare