Mazda 8T12-EA-03K Bedienungsanleitung PDF herunterladen (Seite 229)

Black plate (229,1)

qRemoving a Flat Tire

1. If your vehicle is equipped with a

wheel cover, pry off the wheel cover

with the beveled end of the lug wrench.

Wheel cover

Lug wrench

NOTE

Force the end of the lug wrench firmly

between wheel and cover, or removal

will be difficult.

CAUTION

Align the notch on the wheel cover

with the valve stem when installing it.

Notch

Tire valve

Damage could occur during installation

if the wheel cover is not properly

aligned.

2. Loosen the lug nuts by turning them

counterclockwise one turn each, but

don't remove any lug nuts until the tire

has been raised off the ground.

3. Place the jack under the jacking

position closest to the tire being

changed.

Jacking position

In Case of an Emergency

Flat Tire

7-9

Mazda6_8T12-EA-03K_Edition1 Page229

Friday, December 5 2003 8:58 AM

Form No.8T12-EA-03K

1 2 ... 224 225 226 227 228 229 230 231 232 233 234 ... 325 326

Kommentare zu diesen Handbüchern

Keine Kommentare