Mazda 2002 Tribute Spezifikationen PDF herunterladen (Seite 215)

• If the oil level is below the MIN or ADD mark, add enough oil to raise

the level within the MIN–MAX or ADD-FULL range.

• 2.0L DOHC I4 Zetec engine

• 3.0L DOHC V6 Duratec engine

• Oil levels above the MAX or FULL mark may cause engine damage.

Some oil must be removed from the engine by a service technician.

7. Put the indicator back in and ensure it is fully seated.

Adding engine oil

1. Check the engine oil. For instructions, refer to Checking the engine

oil in this chapter.

2. If the engine oil level is not within the normal range, add only

certified engine oil of the recommended viscosity. Remove the engine

oil filler cap and use a funnel to pour the engine oil into the opening.

3. Recheck the engine oil level. Make sure the oil level is not above the

MAX or FULL mark on the engine oil level indicator (dipstick).

4. Install the indicator and ensure it is fully seated.

5. Fully install the engine oil filler cap by turning the filler cap

clockwise 1/4 of a turn until it is seated.

Maintenance and Specifications

215

1 2 ... 210 211 212 213 214 215 216 217 218 219 220 ... 255 256

Keine Kommentare

Mazda 2002 Tribute Spezifikationen Seite 215