Mazda 2007 3 4-DOOR Bedienungsanleitung PDF herunterladen (Seite 319)

Black plate (318,1)

Replacing a fog light bulb

í

1. Turn the screw counterclockwise and

remove it and partially peel back the

mudguard.

2. Disconnect the electrical connector

from the bulb by pressing the tab on

the connector with your finger and

pulling the connector downward.

3. Turn the socket and bulb assembly to

remove it. Carefully remove the bulb

from its socket in the reflector by

gently pulling it straight backward out

of the socket.

4. Install the new bulb in the reverse order

of removal.

NOTE

l

To replace the bulb, contact an

Authorized Mazda Dealer.

l

If the halogen bulb is accidentally

touched, it should be cleaned with

rubbing alcohol before being used.

l

Use the protective cover and carton

for the replacement bulb to dispose

of the old bulb prom ptly and out of

the reach of children.

Front turn signal lights/Side-marker

lights

Due to the complexity and difficulty of

the procedure, the bulbs should be

replaced by an Authorized Mazda Dealer.

Side turn signal lights

1. Slide the unit as shown in the figure to

remove it.

2. Detach the electrical connector from

the unit by pulling it to the rear.

3. Install the new side turn signa l unit in

the reverse order of removal.

8-44

Maintenance and Care

í

Some models.

Owner Maintenance

Mazda3_8V66-EA-06F_Edition2 Page318

Friday, May 26 2006 10:56 AM

Form No.8V66-EA-06F

1 2 ... 314 315 316 317 318 319 320 321 322 323 324 ... 458 459

Kommentare zu diesen Handbüchern

Keine Kommentare