Mazda 2008 3 4-DOOR Bedienungsanleitung PDF herunterladen (Seite 253)

Black plate (253,1)

qRemoving a Flat Tire

1. If your vehicle is equipped with a

wheel cover, pry off the wheel cover

with the beveled end of the lug wrench.

NOTE

Force the end of the lug wrench firmly between

wheel and cover, or removal will be difficult.

CAUTION

There is a valve-stem mark inside the

wheel cover. When installing the

wheel cover, align this mark with th e

tire's valve stem.

Damage could occur during

installation if the wheel cover is not

properly aligned.

2. Loosen the lug nuts by turning them

counterclockwise one turn each, but

don't remove any lug nuts until the tire

has been raised off the ground.

3. Place the jack under the jacking

position closest to the tire being

changed.

Jacking position

In Case of an Emergency

Flat Tire

7-9

Mazda3_8X41-EA-07F_Edition1 Page253

Wednesday, April 25 2007 1:6 PM

Form No.8X41-EA-07F

1 2 ... 248 249 250 251 252 253 254 255 256 257 258 ... 451 452

Kommentare zu diesen Handbüchern

Keine Kommentare