Mazda 2008 B2300 Truck Bedienungsanleitung PDF herunterladen (Seite 160)

Failure to fully depress the clutch pedal to the floor may cause

increased shift efforts, prematurely wear transmission

components or damage the transmission.

Do not drive with your foot resting on the clutch pedal or use the

clutch pedal to hold your vehicle at a standstill while waiting on a

hill. These actions will reduce the life of the clutch.

Recommended shift speeds

Downshift according to the following charts for your specific

engine/drivetrain combination:

Upshifts

Shift from:

Transfer case position (if equipped)

2WD and 4H 4L

1 -2 10 mph (16 km/h) 4 mph (6 km/h)

2 - 3 19 mph (26 km/h) 8 mph (10 km/h)

3 - 4 28 mph (43 km/h) 12 mph (16 km/h)

4 - 5 (Overdrive) 40 mph (68 km/h) 16 mph (26 km/h)

Maximum downshift speeds

Shift from:

Transfer case position (if equipped)

2WD and 4H 4L

5 (Overdrive) - 4 55 mph (88 km/h) 22 mph (34 km/h)

4 - 3 45 mph (72 km/h) 18 mph (27 km/h)

3 - 2 35 mph (56 km/h) 14 mph (21 km/h)

2 - 1 20 mph (32 km/h) 8 mph (11 km/h)

Reverse

1. Make sure that your vehicle is at a complete stop before you shift

into R (Reverse). Failure to do so may damage the transmission.

2. Move the gearshift lever into the neutral position and wait at least

three seconds before shifting into R (Reverse).

• The gearshift lever can only be moved into R (Reverse) by moving it

from left of 3 (Third) and 4 (Fourth) before shifting into R (Reverse).

This is a lockout feature that protects the transmission from

accidentally being shifted into R (Reverse) from 5 (Overdrive).

Parking your vehicle

1. Apply the brake and shift into the neutral position.

2. Fully apply the parking brake, then shift into 1 (First).

2008 B-Series (mbs)

Owners Guide (post-2002-fmt)

USA (fus)

Driving

160

1 2 ... 155 156 157 158 159 160 161 162 163 164 165 ... 240 241

Keine Kommentare

Mazda 2008 B2300 Truck Bedienungsanleitung Seite 160