Mazda 2008 CX-9 Spezifikationen PDF herunterladen (Seite 50)

Black plate (50,1)

4. To get the retractor into the automatic

locking mode, pull the shoulder belt

portion of the seat belt until the entire

length of the belt is out of the retractor.

5. Push the child-restraint system firmly

into the vehicle seat. Be sure the belt

retracts as snugly as possible. Clicking

from the retractor will be heard during

retraction if the system is in the

automatic locking mode. If the belt

does not lock the seat down tight,

repeat this step.

NOTE

Inspect this function before each use of the

child-restraint system. You should not be able

to pull the shoulder belt out of the retractor

while the system is in the automatic locking

mode. When you remove the child-restraint

system, be sure the belt fully retracts to return

the system to emergency locking mode before

occupants use the seat belts.

6. If your child-restraint system requires

the use of a tether strap, refer to the

manufacturer's instructions to hook and

tighten the tether strap after raising the

head restraint.

Anchor bracket location

Tether strap position

Tether strap

Forward

2-38

Essential Safety Equipment

Child Restraint

CX-9_8Z28-EA-07J_Edition2 Page50

Thursday, November 22 2007 12:2 AM

Form No.8Z28-EA-07J

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 505 506

Kommentare zu diesen Handbüchern

Keine Kommentare