Mazda 2009 CX-9 Spezifikationen PDF herunterladen (Seite 410)

Black plate (410,1)

1. Make sure the booster battery is 12 V

and that its negative terminal is

grounded.

2. If the booster battery is in another

vehicle, don't allow both vehicles to

touch. Turn off the engine of the

vehicle wi th the booster battery and all

unnecessary electrical loads in both

vehicles.

3. Connect the jumper cables in the exact

sequence as in the illustration.

l

Connect one end of a cable to the

positive terminal on the discharged

battery (1).

l

Attach the other end to the positive

terminal on the booster battery (2).

l

Connect one end of the other cable

to the negative terminal of the

booster battery (3).

l

Connect the other end to the ground

point indicated in the illustration

away from the discharged battery

(4).

4. Start the engine of the booster vehicle

and run it a few minutes. Then start the

engine of the other vehicle.

5. When finished, carefully disconnect the

cables in the reverse order described in

the illustration.

Push-Starting

Do not push-start your Mazda.

NOTE

You can't start a vehicle with an automatic

transaxle by pushing it.

7-18

In Case of an Emergency

Emergency Starting

CX-9_8Z66-EA-08F_Edition3 Page410

Tuesday, March 31 2009 1:54 PM

Form No.8Z66-EA-08F

1 2 ... 405 406 407 408 409 410 411 412 413 414 415 ... 537 538

Kommentare zu diesen Handbüchern

Keine Kommentare