Mazda 2009 RX-8 Bedienungsanleitung PDF herunterladen (Seite 354)

Black plate (354,1)

Side-turn signal lights

1. Slide the light unit rearward.

2. Rotate the light unit clockwise as

shown in the figure and pull it out.

3. Press the tab on the bulb socket and

disconnect the connect or cord.

4. Replace with a new light unit and

install it in the reverse order of the

removal procedure

NOTE

The side-turn signal light bulb cannot be

replaced. The entire light unit itself has to be

replaced, therefore consult an Authorized

Mazda Dealer for a replacement light unit.

Brake lights/Taillights

Due to the complexity and difficulty of

the procedure, the LED bulbs should be

replaced by an expert repairer, we

recommend an Authorized Mazda Dealer.

Rear turn signal lights, Reverse lights,

Rear side marker lights

1. Pull the center section of the plastic

retainer and remove the retainers and

partially open the trunk side trim.

Removal

Installation

2. Turn the socket and bulb assembly

counterclockwise and remove it.

3. Disconnect the bulb from the socket.

Rear turn signal lights

8-32

Maintenance and Care

Owner Maintenance

RX-8_8Z09-EA-08C_Edition3 Page354

Thursday, July 3 2008 2:24 PM

Form No.8Z09-EA-08C

1 2 ... 349 350 351 352 353 354 355 356 357 358 359 ... 429 430

Kommentare zu diesen Handbüchern

Keine Kommentare