Mazda 2012 5 Spezifikationen PDF herunterladen (Seite 165)

Black plate (165,1)

NOTE

When the ignition is switched ON, the sound of

the fuel pump motor operating near the fuel

tank can be heard. This does not indicate an

abnormality.

START

The engine is started in this position. It

will crank until you release the key. It

then returns to the ON position.

qIgnition Key Reminder

If the ignition is switched off or the

ignition is switched to ACC with the key

inserted, a continuous beep sound will be

heard when the driver's door is opened.

NOTE

A personalized function is available to change

the sound volume for the ignition key reminder.

Refer to Settings on page 6-186.

Starting the Engine

With advanced key

Refer to “Starting the engine (page 3-12)”

for information on how to start the engine .

NOTE

Engine-starting is controlled by the spark

ignition system.

This system meets all Canadian Interference-

Causing Equipment Standard requirements

regulating the impulse electrical field strength

of radio noise.

1. Occupants should fasten thei r seat

belts.

2. Make sure the parking brake is on.

3. Depress the brake pedal.

4. (Manual transaxle)

Depress the clutch pedal all the way

and shift into neutral.

Keep the clutch pedal depressed while

cranking the engine.

(Automatic transaxle)

Put the vehicle in park (P). If you must

restart the engine while the vehicle is

moving, shift into neutral (N).

NOTE

(Manual transaxle)

The starter will not operate unless the clutch is

depressed sufficiently.

(Automatic transaxle)

The starter will not operate if the shift lever is

not in P or N.

5. Switch the ignition to START and hold

(up to 10 seconds at a time) until the

engine starts.

Driving Your Mazda

Starting and Driving

5-3

Mazda3_8CV6-EA-12H_Edition2 Page165

Wednesday, October 17 2012 3:11 PM

Form No.8CV6-EA-12H

1 2 ... 160 161 162 163 164 165 166 167 168 169 170 ... 605 606

Kommentare zu diesen Handbüchern

Keine Kommentare