Mazda 2012 5 Spezifikationen PDF herunterladen (Seite 503)

Black plate (503,1)

NOTE

l

Always check tire pressure when tires are

cold.

l

Warm tires normally exceed recommended

pressures. Don't release air from warm tires

to adjust the pressure.

l

Underinflation can cause reduced fuel

economy, uneven and accelerated tire wear,

and poor sealing of the tire bead, which

will deform the wheel and cause separation

of tire from rim.

l

Overinflation can produce a harsh ride,

uneven and accelerated tire wear, and a

greater possibility of damage from road

hazards.

Keep your tire pressure at the correct

levels. If one frequently needs inflating,

have it inspected.

qTire Rotation

WARNING

Rotate tires periodically:

Irregular tire wear is dangerous. To

equalize tread wear for maintaining

good performance in handling and

braking, rotate the tires according to

the scheduled maintenance charts.

Refer to Scheduled Mainten ance on

page 8-4.

During rotation, inspect them for correct

balance.

Do not include (TEMPORARY USE ONLY)

spare tire in rotation.

Forward

Also, inspect them for uneven wear and

damage. Abnormal wear is usually caused

by one or a combinati on of the following:

l

Incorrect tire pressure

l

Improper wheel alignment

l

Out-of-balance wheel

l

Severe braking

After rotation, inflate all tire pressures to

specification (page 10-12) and inspect the

lug nuts for tightness.

CAUTION

Rotate unidirectional tires and radial

tires that have an asymmetrical tread

pattern or studs only from front to

rear, not from side to side. Tire

performance will be reduced if

rotated from side to side.

Maintenance and Care

Owner Maintenance

8-41

Mazda3_8CV6-EA-12H_Edition2 Page503

Wednesday, October 17 2012 3:16 PM

Form No.8CV6-EA-12H

1 2 ... 498 499 500 501 502 503 504 505 506 507 508 ... 605 606

Kommentare zu diesen Handbüchern

Keine Kommentare