Mazda MAZDA3 4-Door Bedienungshandbuch PDF herunterladen (Seite 180)

4

–

54

When Driving

Switches and Controls

Auto-wiper control

When the wiper lever is in the

position, the rain sensor senses the amount

of rainfall on the windshield and turns the

wipers on or off automatically (off—

intermittent—low speed—high speed).

The sensitivity of the rain sensor can be

adjusted by turning the switch on the

wiper lever.

From the center position (normal), rotate

the switch downward for higher sensitivity

(faster response) or rotate it upward for

less sensitivity (slower response).

Higher sensitivity

Less sensitivity

Switch

Center

position

CAUTION

¾

Do not shade the rain sensor by

adhering a sticker or a label on the

windshield. Otherwise the rain sensor

will not operate correctly.



¾

When the wiper lever is in the AUTO

position and the ignition is switched ON,

the wipers may move automatically in

the following cases:

¾

If the windshield above the rain

sensor is touched or wiped with a

cloth.

¾

If the windshield is struck with a hand

or other object from either outside or

inside the vehicle.



Keep hands and scrapers clear of the

windshield when the wiper lever is in

the AUTO position and the ignition

is switched ON as  ngers could be

pinched or the wipers and wiper blades

damaged when the wipers activate

automatically.



If you are going to clean the windshield,

be sure the wipers are turned o

completely (when it is most likely

that the engine is left running) this is

particularly important when clearing ice

and snow.

/C\FCA&('#*A'FKVKQPKPFD/C\FCA&('#*A'FKVKQPKPFD 

1 2 ... 175 176 177 178 179 180 181 182 183 184 185 ... 585 586

Kommentare zu diesen Handbüchern

Keine Kommentare