Mazda MAZDA3 4-Door Bedienungshandbuch PDF herunterladen (Seite 446)

6

–

48

Maintenance and Care

Owner Maintenance

4. Turn the socket and bulb assembly

to remove it. Carefully remove the

bulb from its socket in the reﬂ ector by

gently pulling it straight backward out

of the socket.

5. Install the new bulb in the reverse order

of the removal procedure.

Daytime running lights/Parking lights

(With xenon fusion headlights)

Due to the complexity and difﬁ culty of

the procedure, the LED bulbs must be

replaced by an Authorized Mazda Dealer.

NOTE

LED bulb replacement is not possible

because it is built into the unit. Replace

the unit.

Front turn signal lights, Parking lights/

Front side-marker lights (With halogen

headlights), Front side-marker lights

(With xenon fusion headlights)

1. If you are changing the right bulb, start

the engine, turn the steering wheel all

the way to the left, and turn off engine.

If you are changing the left bulb, turn

the steering wheel to the right, and turn

off engine.

2. Make sure the headlight switch is off.

3. Pull the center of each plastic retainer

and remove the retainers.

Removal

Installation

4. Turn the screw counterclockwise and

remove it, and then partially peel back

the mudguard.

5. Turn the socket and bulb assembly

counterclockwise and remove it.

/C\FCA&('#*A'FKVKQPKPFD/C\FCA&('#*A'FKVKQPKPFD 

1 2 ... 441 442 443 444 445 446 447 448 449 450 451 ... 585 586

Kommentare zu diesen Handbüchern

Keine Kommentare