Mazda MX-5 Bedienungshandbuch PDF herunterladen (Seite 152)

Black plate (152,1)

ACC (Accessory)

The steering wheel unlocks and some

electrical accessories will operate.

ON

This is the normal running position after

the engine is started. The warning lights

should be inspected before the engine is

started (page 5-39).

NOTE

When the ignition switch is turned to the ON

position, the sound of the fuel pump motor

operating near the fuel tank can be heard. This

does not indicate an abnormality.

START

The engine is started in this position. It

will crank until you release the key; then

it returns to the ON position.

qIgnition Key Reminder

If the ignition switch is in the LOCK or

ACC position with the key inserted, a

continuous beep sound will be heard

when the driver's door is opened.

Starting the Engine

NOTE

Engine-starting is controlled by the spark

ignition system.

This system meets all Canadian Interference-

Causing Equipment Standard requirements

regulating the impulse electrical field strength

of radio noise.

1. Occupants should fasten their seat

belts.

2. Make sure the parki ng brake is on.

3. Depre ss the brake pedal.

4. (Manual transmission)

Depress the clutch pedal all the way

and shift into neutral.

Keep the clutch pedal depressed while

cranking the engine.

(Automatic transmission)

Put the vehicle in park (P). If you must

restart the engine while the vehicle is

moving, shift into neutral (N).

NOTE

(Manual transmission)

The starter will not operate if the clutch pedal

is not depressed all the way.

(Automatic transmission)

The starter will not operate if the shift lever is

not in P or N.

5. Turn the ignition switch to the START

position and hold (up to 10 seconds at

a time) until the engine starts.

5-4

Driving Your Mazda

Starting and Driving

MX-5_8X49-EA-07F_Edition2 Page152

Monday, June 25 2007 11:18 AM

Form No.8X49-EA-07F

1 2 ... 147 148 149 150 151 152 153 154 155 156 157 ... 457 458

Kommentare zu diesen Handbüchern

Keine Kommentare