Mazda MX-5 Bedienungshandbuch PDF herunterladen (Seite 173)

Black plate (173,1)

qDSC OFF Indicator Light

This indicator light stays on for a few

seconds when the ignition switch is turned

to the ON position.

It also comes on when the DSC OFF

switch is pressed and TCS/DSC is

switched off (page 5-25).

If the light stays on when the TCS/DSC is

not switched off, take your vehicle to an

Authorized Mazda Dealer. The dynamic

stability control may have a malfunction.

NOTE

If the battery is disconnected or a fuse is

replaced, the DSC will be inoperable. In this

case, the DSC OFF indicator light flashes and

the TCS/DSC indicator light illuminates.

To make the DSC operable, do the following

procedure with the battery connected.

1. Turn the ignition switch to the ON position.

2. Turn the steering clockwise fully, then turn

it counterclockwise fully.

3. Make sure the DSC OFF indicator goes off.

4. Turn the ignition switch to the OFF

position, then turn it to the ON position

again.

5. Make sure the TCS/DSC indicator light

goes off.

If the TCS/DSC indicator light and the DSC

OFF indicator light remain illuminated even

after turning the ignition switch to the ON

position, consult an Authorized Mazda Dealer.

qDSC OFF Switch

Press the DSC OFF switch to turn off the

TCS/DSC. The DSC OFF indicator light

will illuminate.

Press the switch again to turn the TCS/

DSC back on. The DSC OFF indicator

light will go out.

Driving Your Mazda

Starting and Driving

5-25

MX-5_8X49-EA-07F_Edition2 Page173

Monday, June 25 2007 11:18 AM

Form No.8X49-EA-07F

1 2 ... 168 169 170 171 172 173 174 175 176 177 178 ... 457 458

Kommentare zu diesen Handbüchern

Keine Kommentare