Mazda 1983 RX7 Spezifikationen PDF herunterladen (Seite 91)

100

101

1.1L ROTARY

Article Text (p. 8)

1983 Mazda RX7

For www.iluvmyrx7.com

Sunday, August 26, 2001 04:57PM

Fig. 9: Stationary Gear Slot & Dowel Alignment

Illustration applies to front and rear housings.

Rotor Housing

1) Inspect rotor housing for signs of water or gas leakage.

Check for wear or damage to rotor running surface or stationary gear.

Check main bearings for signs of scoring or flaking.

2) To clean housing, wipe off sealing agent or carbon in

rotor running surface with a rag and ketone or thinner. Remove rust

deposits in water cooling passages.

3) Inspect for cracks or damage to chromium-plated surface.

Check for signs of gas or water leakage. Housing must be replaced if

any of these conditions exist.

4) Place a straightedge across sealing surface of rotor

housing and check for distortion with a feeler gauge. If distortion

exceeds .0016" (.04 mm), replace housing. See Fig. 10.

Fig. 10: Measuring Rotor Housing for Distortion

Replace if distortion exceeds limit.

5) Check rotor housing thickness at points A, B, C, and D in

Fig. 11. If micrometer readings vary between point A and minimum value

for B, C, and D by more than .0024" (.06 mm), replace rotor housing.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 457 458

Kommentare zu diesen Handbüchern

Keine Kommentare

Mazda 1983 RX7 Spezifikationen Seite 91

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Mazda 1983 RX7