Mazda 2009 RX-8 Bedienungsanleitung PDF herunterladen (Seite 79)

Black plate (79,1)

Turning off the engine

NOTE

For improved engine starting performance the

next time you start the engine after only

driving the vehicle a short distance, turn off

the engine after 1 or more of the variable red

zone lamps in the tachometer have turned off.

1. Move the shift lever to the P position

(Automatic transmission).

2. Turn the igni tion switch from the ON

position to the ACC position.

NOTE

When the engine is turned off and the ignition

switch it turned from the ACC position to the

LOCK position, the KEY indicator light

(green) flashes in the instrument cluster for

about 30 seconds if the battery power of the

advanced key is low. Replace the battery with a

new one.

Refer to Battery Replacement (page 3-6).

3. Push in the start knob from the ACC

position and turn it to the LOCK

position.

CAUTION

When leaving the vehicle, make sure

the ignition switch is turned to the

LOCK position.

NOTE

l

When turning the ignition switch to the

LOCK position, the ignition switch has to

be pushed in from the ACC position and

turned. Without being pushed in, the

ignition switch stops at the ACC position

and the vehicle battery may be discharged

if the ignition switch is left in the ACC

position. When leaving the vehicle, make

sure the ignition switch is turned to the

LOCK position.

l

If the vehicle is left with the ignition switch

not in the LOCK position, a beep sound is

heard and the indicator light flashes to

notify the driver.

Refer to Warning Beep (page 3-17).

Knowing Your Mazda

Advanced Keyless Entry and Start System

3-13

RX-8_8Z09-EA-08C_Edition3 Page79

Thursday, July 3 2008 2:22 PM

Form No.8Z09-EA-08C

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 429 430

Kommentare zu diesen Handbüchern

Keine Kommentare