CARBURETOR - NIKKI 4-BBLArticle Text (p. 5)
1984 Mazda RX7For iluvmy
1) Disconnect connector from relay. Using an ohmmeter
without power applied, connect leads between terminals 1 and 2. There
should be continuity between terminals 1 and 2, but not between 3 and
4.
2) Connect battery power to terminal 6 and ground terminal
5. Continuity should now exist between terminals 3 and 4, but not at
terminals 1 and 2.
Fig. 7: Checking Choke Relay Continuity
Continuity should exist at terminals 1 and 2 without power applied;
at terminals 3 and 4 with power applied.
HOT START ASSIST CABLE
Pull hot start assist motor inner cable until stopper lever
touches start lever. Check for free play of .4-.8" (1-2 mm). See
Fig. 8. If free play is not within specified range, loosen screw,
adjust free play, and retighten screw.
Fig. 8: Hot Start Assist Cable Adjustment
HOT START ASSIST RELAY
Disconnect connector from relay. Using an ohmmeter without
power applied, continuity should exist between terminals 1 and 4.
Connect battery power to terminal 2 and ground terminal 3. No
continuity should exist between terminals 1 and 4. See Fig. 9.
Kommentare zu diesen Handbüchern