Mazda 2009 Mazda6 Spezifikationen PDF herunterladen (Seite 175)

Black plate (175,1)

If the warning light illuminates again even

after the tire pressures are adjusted, there

may be a tire puncture. Replace the

punctured tire with the temporary spare

tire (page 7-6).

NOTE

A tire pressure sensor is not installed to the

temporary spare tire. The warning light will

flash continuously while the temporary spare

tire is being used.

Warning light flashes

When the warning light flashes, there may

be a system malfunction. Consult an

Authorized Mazda Dealer.

qSystem Error Activation

When the warning light flashes, there may

be a system malfunction. Consult an

Authorized Mazda Dealer.

A system error activation may occur in

the following cases:

l

When there is equipment or a device

near the vehicle using the same radio

frequency as that of the tire pressure

sensors.

l

When using the following devices in

the vehicle that may cause radio

interference with the receiver unit.

l

A digital device such as a personal

computer.

l

A current converter device such as a

DC-AC converter.

l

When excess snow or ice adheres to

the vehicle, especially around the

wheels.

l

When the tire pressure sensor batteries

are exhausted.

l

When using a wheel with no tire

pressure sensor installed.

l

When using tires with steel wire

reinforcement in the side walls.

qTires and Wheels

CAUTION

When inspecting or adjusting the tire

air pressures, do not apply excessive

force to the stem part of the wheel

unit. The stem part could be

damaged.

Changing tires and wheels

The following procedure allows the

TPMS to recognize a tire pressure sensor's

unique ID signal code whenever tires or

wheels are changed, such as changing to

and from winter tires.

NOTE

Each tire pressure sensor has a unique ID

signal code. The signal code must be

registered with the TPMS before it can work.

The easiest way to do it is to have an

Authorized Mazda Dealer change your tire and

complete ID signal code registration.

When having tires changed at an

Authorized Mazda Dealer

Tire pressure sensor ID signal code

registration is completed when an

Authorized Mazda Dealer changes your

vehicle's tires.

When changing tires yourself

If you or someone else changes tires, you

or someo ne else can also undertake the

steps for the TPMS to complete the ID

signal code registration.

1. After tires have been changed, switch

the ignition ON, then back to ACC or

off (LOCK).

2. Wait for about 15 minutes.

Driving Your Mazda

Starting and Driving

5-31

Mazda6_8Z64-EA-08H_Edition1 Page175

Wednesday, June 25 2008 10:4 AM

Form No.8Z64-EA-08H

1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 463 464

Kommentare zu diesen Handbüchern

Keine Kommentare