Mazda B4000 Spezifikationen PDF herunterladen (Seite 236)

4. Replace the valve cap.

5. Repeat this procedure for each tire, including the spare.

Note: Some spare tires require higher inflation pressure than the other

tires.

6. Visually inspect the tires to make sure there are no nails or other

objects embedded that could poke a hole in the tire and cause an air

leak.

7. Check the sidewalls to make sure there are no gouges, cuts, bulges

or other irregularities.

Tire and wheel alignment

A bad jolt from hitting a curb or pothole can cause the front end of your

vehicle to become misaligned or damage to your tires. If your vehicle

seems to pull to one side, vibrate or shake when you’re driving, the

wheels may be out of alignment. Have a qualified technician at a

reputable repair facility check the wheel alignment periodically.

Wheel misalignment in the front or the rear can cause uneven and rapid

treadwear of your tires and should be corrected by a qualified technician

at a reputable repair facility. Front wheel drive (FWD) vehicles, and

those with independent front suspension require alignment of all four

wheels.

The tire should also be balanced periodically. An unbalanced tire and

wheel assembly may result in irregular tire wear.

NOTE: When it is time to replace front tires with new ones, this is an

ideal time to perform an alignment. New tires should be balanced at the

time they are installed.

Tire rotation

Rotating your tires at the recommended interval (as indicated in the

Service Maintenance Guide that comes with your vehicle) will help your

tires wear more evenly providing better tire performance and longer tire

life. Unless otherwise specified, rotate the tires approximately every

8,000 km (5,000 miles).

Maintenance and Specifications

236

1 2 ... 231 232 233 234 235 236 237 238 239 240 241 ... 255 256

Keine Kommentare

Mazda B4000 Spezifikationen Seite 236