Mazda B4000 Spezifikationen PDF herunterladen (Seite 38)

WARNING: Handling Halogen Bulbs: When a halogen bulb

breaks, it is dangerous. These bulbs contain pressurized gas. If

one is broken, it will explode and serious injuries could be

caused by the flying glass. If the glass portion of the bulb is

touched with bare hands, body oil could cause the bulb to

overheat and explode when lit. Never touch the glass portion of

the bulb with your bare hands and always wear eye protection

when handling or working around halogen bulbs.

Children and Halogen Bulbs: Playing with a halogen bulb is

dangerous. Serious injuries could be caused by dropping a

halogen bulb or breaking in some other way. Always keep

halogen bulbs out of the reach of children.

To remove the headlamp bulb:

1. Make sure headlamp switch is in

OFF position, then open the

hood.

2. At the back of the headlamp,

pry up the two retainer pins to

release the headlamp assembly

from the vehicle and pull

headlamp forward.

3. Remove the bulb retaining ring

by rotating it counterclockwise

(when viewed from the rear) to

free it from the bulb socket, and

slide the ring off the plastic

base. Keep the ring to retain the

new bulb.

4. Without turning, remove the old

bulb by gently pulling it straight

back out of the lamp assembly.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 255 256

Keine Kommentare

Mazda B4000 Spezifikationen Seite 38