Mazda CX-9 Bedienungshandbuch PDF herunterladen (Seite 54)

Black plate (54,1)

2. If the seat in which you install a child-

restraint system has a seat slide

function, slide the seat as far back as

possible.

3. Make sure the seatback is securely

latched by pushing it back until it is

fully locked.

4. Raise the head restraint to the top

locked position.

Refer to Head Restraints on page 2-15.

5. Secure the child-restraint system with

the lap portion of the lap/shoulder belt.

See the manufacturer's instructions on

the child-restraint system for belt

routing instructions.

6. To get the retractor into the automatic

locking mode, pull the shoulder belt

portion of the seat belt until the entire

length of the belt is out of the retractor.

7. Push the child-restraint system firmly

into the vehicle seat. Be sure the belt

retracts as snugly as possible. A

clicking noise from the retractor will be

heard during retraction if the system is

in the automatic locking mode. If the

belt does not lock the seat down tight,

repeat this step.

NOTE

Inspect this function before each use of the

child-restraint system. You should not be able

to pull the shoulder belt out of the retractor

while the system is in the automatic locking

mode. When you remove the child-restraint

system, be sure the belt fully retracts to return

the system to emergency locking mode before

occupants use the seat belts.

8. If your child-restraint system requires

the use of a tether strap, refer to the

manufacturer's instructions to hook and

tighten the tether strap after raising the

head restraint.

2-42

Essential Safety Equipment

Child Restraint

CX-9_8CM9-EA-12I_Edition1 Page54

Thursday, September 13 2012 2:34 PM

Form No.8CM9-EA-12I

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 597 598

Kommentare zu diesen Handbüchern

Keine Kommentare