Mazda CX-9 Bedienungshandbuch PDF herunterladen (Seite 56)

Black plate (56,1)

qThird-Row Seats Child-Restraint

System Installation

The thir d-row seats cannot accommodate

LATCH-type child-restraint systems or

tethers, therefore these systems must be

installed on the other seat positions such

as the second-row seat. If this is not

possible, LATCH-type child-restraint

systems should be installed to a third-row

seat using the seat belt depending on

whether the child-restraint manufacturer

allows their use without LATCH

attachments and tether anchors.

Follow these manufacturer's instructions

when using a child-restraint system.

NOTE

l

Follow the child-restraint system

manufacturer's instructions carefully.

Depending on the type of child-restraint

system, it may not employ seat belts which

are in automatic locking mode.

l

(With foldable head restraints)

The third-row outboard head restraints

cannot be adjusted.

1. (Without foldable head restraints)

Raise the head restraint to the top

locked position. Refer to Head

Restraints on page 2-15.

2. Secure the child-restraint system with

the lap portion of the lap/shoulder belt.

See the manufacturer's instructions on

the child-restraint system for belt

routing instructions.

3. To get the retractor into the automatic

locking mode, pull the shoulder belt

portion of the seat belt until the entire

length of the belt is out of the retractor.

4. Push the child-restraint system firmly

into the vehicle seat. Be sure the belt

retracts as snugly as possible. Clicking

from the retractor will be heard during

retraction if the system is in the

automatic locking mode. If the belt

does not lock the seat down tight,

repeat this step.

2-44

Essential Safety Equipment

Child Restraint

CX-9_8CM9-EA-12I_Edition1 Page56

Thursday, September 13 2012 2:34 PM

Form No.8CM9-EA-12I

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 597 598

Kommentare zu diesen Handbüchern

Keine Kommentare