Mazda MAZDA5 Bedienungshandbuch PDF herunterladen (Seite 245)

Black plate (245,1)

NOTE

l

Always perform Bluetooth audio device

programming while the vehicle is stopped.

l

If a Bluetooth device has already been

programmed to the vehicle as a hands-free

mobile phone, it does not need to be

programmed again when using the device

as a Bluetooth audio device. Conversely, it

does not need to be programmed again as a

hands-free mobile phone if it has already

been programmed as a Bluetooth audio

device.

l

Look around to be sure other likely

Bluetooth audio devices are not in range

when you start to program. If in doubt,

move your car to another location. The

transmission range of a Bluetooth audio

device is about 10 m (32 ft). Therefore, if

there is another Bluetooth audio device

within a 10 m (32 ft) radius of the vehicle,

the device may be identified and

programmed instead.

l

Device registration can also be done using

voice recognition (page 6-70).

Concerning the operation of a Bluetooth

audio device itself, refer to its instruction

manual.

Some Bluetooth audio devices have PIN

codes (four digits). Refer to the audio

device's instruction manual because the

programming procedure differs depending

on whether it has a PIN code or not.

Programming a Bluetooth audio device

which has a four-digit PIN code

1. Using the audio control dial, select the

pairing program mode

“PAIR DEVICE” in the “BT SETUP”

mode. (Refer to

“Bluetooth audio device set-up” for

details.)

2. Press the audio control dial to

determine the mode.

After “ENTER PIN” is displayed on

the information display for three

seconds, “ PIN 0000” is displayed and

the PIN code can be input.

3. Input the PIN code of your Bluetooth

audio device by pressing channel

preset buttons 1 to 4 while “PIN 0000”

is displayed.

Press channel preset button 1 to input

the first digit, 2 for the second, 3 for

the third, and 4 for the forth. For

example, if the PIN code were “4213”,

press channel preset button 1 four

times (1, 2, 3, 4), button 2 twice (1, 2),

button 3 once (1), and button 4 three

times (1, 2, 3). If the “PIN 0000 ”

display disappears before finishing the

PIN code input, repeat the procedure

from Step 1.

NOTE

Some devices accept only a particular pairing

code (Usually, “0000” or “1234”).

If pairing cannot be completed, refer to the

owner's manual of your mobile device, and try

those numbers if necessary.

4. Press the audio control dial while the

input PIN code is displayed.

“PAIRING” flashes on the display.

5. Operate the Bluetooth audio device and

set it to the program mode while

“PAIRING” is flashing.

6. When the programming is completed,

“

” and “PAIR SUCCESS” are

displayed after about 10-30 seconds,

after which “PAIR SUCCESS”

continues to be displayed for three

seconds, and then the unit returns to the

normal display.

Interior Comfort

Bluetooth Audio

6-59

Mazda5_8BR9-EA-10J_Edition1 Page245

Thursday, September 23 2010 2:36 PM

Form No.8BR9-EA-10J

1 2 ... 240 241 242 243 244 245 246 247 248 249 250 ... 439 440

Kommentare zu diesen Handbüchern

Keine Kommentare