Mazda MAZDA5 Bedienungshandbuch PDF herunterladen (Seite 312)

Black plate (312,1)

3 Pull out the battery cover being

careful not to allow it to contact

the cowl grille.

Battery cover

Cowl grille

Installing battery cover

1 Being careful not to contact the

cowl grille, insert the tabs on the

one end of the battery cover into

the holes of the battery tray and

engage the tabs.

Cowl grille

Tabs

Holes

2 Attach the clips on both sides of

the battery cover.

Clip

2. Make sure the booster battery is 12 V

and that its negative terminal is

grounded.

3. If the booster battery is in another

vehicle, don't allow both vehicles to

touch. Turn off the engine of the

vehicle with the booster battery and all

unnecessary electrical loads in both

vehicles.

4. Connect the jumper cables in the exact

sequence as in the illustration.

l

Connect one end of a cable to the

positive terminal on the discharged

battery (1).

l

Attach the other end to the positive

terminal on the booster battery (2).

l

Connect one end of the other cable

to the negative terminal of the

booster battery (3).

l

Connect the other end to the ground

point indi cated in the illustration

away from the discharged battery

(4).

5. Start the engine of the booster vehicle

and run it a few minutes. Then start the

engine of the other vehicle.

7-20

In Case of an Emergency

Emergency Starting

Mazda5_8BR9-EA-10J_Edition1 Page312

Thursday, September 23 2010 2:36 PM

Form No.8BR9-EA-10J

1 2 ... 307 308 309 310 311 312 313 314 315 316 317 ... 439 440

Kommentare zu diesen Handbüchern

Keine Kommentare