F18
FUEL SYSTEM
FUEL TANK REMOVAL/INSTALLATION
A6E391242110W01
Warning
•
••
• Repairing a fuel tank that has not been properly steam cleaned can be dangerous. Explosion or
fire may cause death or serious injury. Always properly steam clean a fuel tank before repairing it.
•
••
• Fuel line spills and leakage are dangerous. Fuel can ignite and cause serious injuries or death and
damage. Fuel can also irritate skin and eyes. To prevent this, do not damage the sealing surface of
the fuel pump unit when removing or installing.
Caution
•
••
• Disconnecting/connecting the quick release connector without cleaning it may possibly cause
damage to the fuel pipe and quick release connector. Always clean the quick release connector
joint area before disconnecting/connecting using a cloth or soft brush, and make sure that it is
free of foreign material.
1. Level the vehicle.
2. Complete the BEFORE REPAIR PROCEDURE. (See F17 BEFORE REPAIR PROCEDURE.)
3. Disconnect the negative battery cable.
4. Remove the fuel pump unit. (See F22 FUEL PUMP UNIT REMOVAL/INSTALLATION.)
5. Siphon the fuel from the fuel tank.
6. Remove the middle pipe. (See F35 EXHAUST SYSTEM REMOVAL/INSTALLATION.)
7. Remove in the order indicated in the table.
8. Install in the reverse order of removal.
9. Complete the AFTER REPAIR PROCEDURE. (See F17 AFTER REPAIR PROCEDURE.)
.
A6E3912W013
1 Joint hose
(See F19 Joint Hose Installation Note)
2 Breather hose
(See F19 Breather Hose Installation Note)
3 Evaporative hose
4 Fuel tank
5 Fuel-filler pipe
6 C-ring
7 Filler cap
Kommentare zu diesen Handbüchern