Mazda 2002 Tribute Spezifikationen PDF herunterladen (Seite 59)

Function Number of bulbs Trade number

Front door courtesy

lamp

168

Map lamps 2 168 (T10)

Ashtray lamp 1 161

All replacement bulbs are clear in color except where noted.

To replace all instrument panel lights - see your dealer.

Replacing headlamp bulbs

1. Make sure that the headlamp control is in the OFF position.

2. Open the hood.

3. Disconnect the electrical

connector from the bulb by

pulling rearward.

4. Remove the rubber boot from

the lamp assembly by pulling on

one of the tabs.

5. Squeeze the retainer spring

together releasing it from bulb

hooks and rotate it away from

the bulb.

6. Without turning, carefully pull bulb out of headlamp assembly.

Handle a halogen headlamp bulb carefully and keep out of

children’s reach. Grasp the bulb only by its plastic base and do

not touch the glass. The oil from your hands could cause the bulb

to break the next time the headlamps are operated.

NOTE: If the bulb is accidentally touched, it should be cleaned with

rubbing alcohol before being used.

7. Insert the glass end of the new bulb into the headlamp assembly.

When the bulb’s three metal tabs are aligned with the grooves in the

plastic base, push the bulb into the lamp assembly until the bulb’s

metal base contacts the rear of the lamp assembly.

8. Rotate the retainer spring over the bulb plastic base and secure it on

the bulb hooks.

9. Install rubber boot on the lamp assembly.

10. Connect the electrical connector into the rear of the plastic base

until it “snaps.”

Lights

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 255 256

Keine Kommentare

Mazda 2002 Tribute Spezifikationen Seite 59