Mazda 2008 B2300 Truck Bedienungsanleitung PDF herunterladen (Seite 58)

• If the vehicle speed increases above the set speed on a downhill, you

may want to apply the brakes to reduce the speed.

• If the vehicle speed decreases more than 10 mph (16 km/h) below

your set speed on an uphill, your speed control will disengage.

Disengaging speed control

To disengage the speed control:

• Depress the brake pedal or

• Depress the clutch pedal (if equipped).

Disengaging the speed control will not erase previous set speed.

Note: When you use the clutch pedal to disengage the speed control,

the engine speed may briefly increase, this is normal.

Resuming a set speed

Press the RES (resume) control and

release it. This will automatically

return the vehicle to the previously

set speed.

Increasing speed while using speed control

There are three ways to set a higher

speed:

• Press and hold the SET + control

until you get to the desired

speed, then release the control.

• Press and release the SET +

control to operate the Tap-Up function. Each tap will increase the set

speed by 1 mph (1.6 km/h).

• Use the accelerator pedal to get to the desired speed. When the

vehicle reaches that speed press and release the SET + control.

2008 B-Series (mbs)

Owners Guide (post-2002-fmt)

USA (fus)

Driver Controls

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 240 241

Keine Kommentare

Mazda 2008 B2300 Truck Bedienungsanleitung Seite 58