Mazda 2008 B2300 Truck Bedienungsanleitung PDF herunterladen (Seite 59)

Reducing speed while using speed control

There are three ways to reduce a

set speed:

• Press and hold the CST - control

until you get to the desired

speed, then release the control.

• Press and release the CST -

control to operate the Tap-Down

function. Each tap will decrease the set speed by 1 mph (1.6 km/h).

• Depress the brake pedal or the

clutch pedal (if equipped) until

the desired vehicle speed is

reached, press the SET + control.

Turning off speed control

There are three ways to turn off the speed control:

• Depress the brake pedal or the clutch pedal (if equipped). This will

not erase your vehicle’s previously set speed.

• Press the speed control OFF

control.

• Turn OFF the ignition.

Note: When you turn off the speed

control or the ignition, your speed

control set speed memory is erased.

Note: Fully depressing the clutch

pedal may cause a flare in engine RPM as the throttle is returned to idle.

This is normal.

OVERDRIVE CONTROL (IF EQUIPPED)

Activating overdrive

(Overdrive) is the normal drive position for the best fuel economy.

The overdrive function allows automatic upshifts and downshifts through

all available gears.

2008 B-Series (mbs)

Owners Guide (post-2002-fmt)

USA (fus)

Driver Controls

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 240 241

Keine Kommentare

Mazda 2008 B2300 Truck Bedienungsanleitung Seite 59