Mazda 2008 Speed 3 Spezifikationen PDF herunterladen (Seite 399)

Black plate (399,1)

3. Turn the center section of the plastic

retainer counterclockwise and remove

the retainers and partially peel back the

mudguard.

Installation

Removal

4. Turn the socket and bulb assembly

counterclockwise and remove it.

5. Disconnect the bulb from the socket.

6. Install the new bulb in the reverse order

of the removal procedure.

Replacing a Fog Light Bulbs

í

1. Make sure the ignition is switched off,

and the headlight switch is off.

2. Turn the screw counterclockwise and

remove it and then partially peel back

the mudguard.

3. Disconnect the electrical connector

from the bulb by pressing the tab on

the connector with your finger and

pulling the connector downward.

4. Turn the socket and bulb assembly to

remove it. Carefully remove the bulb

from its socket in the reflector by

gently pulling it straight back out of the

socket.

5. Install the new bulb in the reverse order

of removal.

Maintenance and Care

Owner Maintenance

8-41

í

Some models.

Mazda3_8AD2-EA-08K_Edition1 Page399

Thursday, October 9 2008 1:7 PM

Form No.8AD2-EA-08K

1 2 ... 394 395 396 397 398 399 400 401 402 403 404 ... 483 484

Kommentare zu diesen Handbüchern

Keine Kommentare