Mazda 2010 CX-7 Spezifikationen PDF herunterladen (Seite 442)

Black plate (442,1)

3. When waxing, coat evenly with the

sponge supplied or a soft cloth.

4. Wipe off the wax wi th a soft cloth.

NOTE

A spot remover to remove oil, tar, and similar

materials will usually also take off the wax.

Rewax these areas even if the rest of the

vehicle does not need it.

qRepairing Damage to the Finish

Deep scratches or chips on the finish

should be repaired promptly. Exposed

metal quickly rusts and can lead to major

repairs.

CAUTION

If your Mazda is damaged and needs

metal parts repaired or replaced,

make sure the body shop applies

anti-corrosion materials to all parts,

both repaired and new. This will

prevent them from rusting.

qPaint Damage Touch-up

Repair damage to the finish caused by

stone chipping, damage during parking

etc., by using Mazda touch-up paint

before rust begins to form. First, remove

the dirt and grease with a clean soft cloth.

If rust has already begun to form:

1. Remove rust completely with

sandpaper.

2. Wipe with a clean soft cloth.

3. Apply rust preventive primer to the

area.

4. After drying it completely, apply a

suitable top coat material to the area.

Of course there will be no problem if you

assign the work to an Authorized Mazda

Dealer.

qCavity Protection

Cavities are treated for protection at the

factory, but additional protective treatment

after the vehicle has been put into use will

extend the life of the body.

We recommend that you consult an

Authorized Mazda Dealer concern ing this

additional precaution.

qBright-Metal Maintenance

l

Use tar remover to remove road tar and

insects. Never do this with a knife or

similar tool.

l

To prevent corrosion on bright-metal

surfaces, apply wax or chrome

preservative and rub it to a high luster.

l

During cold weather or in coastal areas,

cover bright-metal parts with a coating

of wax or preservative heavier than

usual. It would also help to coat them

with noncorrosive petroleum jelly or

some other protective compound.

CAUTION

Don't use steel wool, abrasive

cleaners, or strong detergents

containing highly alkaline or caustic

agents on chrome-plated or anodized

aluminum parts. This may result in

damage to the protective coating and

cause discoloration or paint

deterioration.

8-58

Maintenance and Care

Appearance Care

CX-7_8AS7-EA-09E_Edition2 Page442

Friday, June 5 2009 2:27 PM

Form No.8AS7-EA-09E

1 2 ... 437 438 439 440 441 442 443 444 445 446 447 ... 509 510

Kommentare zu diesen Handbüchern

Keine Kommentare