Mazda 2010 MazdaSpeed3 Spezifikationen PDF herunterladen (Seite 354)

Black plate (354,1)

NOTE

l

Make sure the jack is well lubricated before

using it.

(With Tire Pressure Monitoring System)

l

Be sure to register the tire pressure sensor

ID signal code whenever tires or wheels are

changed (page 5-33).

1. Park on a level surface off the right-of-

way and firmly set the parking brake.

2. Put a vehicle with an automatic

transaxle in Park (P), a manual

transaxle in Reverse (R) or 1, and turn

off the engine.

3. Turn on the hazard warning flasher.

4. Have everyone get out of the ve hicle

and away from the vehicle and traffic.

5. Remove the jack, tool, and spare tire

(page 7-3).

6. Block the wheel diagonally opposite

the flat tire. When blocking a wheel,

place a tire block both in front and

behind the tire.

NOTE

When blocking a tire, use rocks or wood blocks

of sufficient size if possible to hold the tire in

place.

qRemoving a Flat Tire

1. If your vehicle is equipped with a

wheel cover, pry off the wheel cover

with the beveled end of the lug wrench.

NOTE

Force the end of the lug wrench firmly between

wheel and cover, or removal will be difficult.

CAUTION

There is a valve-stem mark inside the

wheel cover. When installing the

wheel cover, align this mark with the

tire's valve stem.

Damage could occur during

installation if the wheel cover is not

properly aligned.

7-10

In Case of an Emergency

Flat Tire

Mazda3_8AR3-EA-09E_Edition2 Page354

Monday, June 1 2009 1:18 PM

Form No.8AR3-EA-09E

1 2 ... 349 350 351 352 353 354 355 356 357 358 359 ... 499 500

Kommentare zu diesen Handbüchern

Keine Kommentare