Mazda 2010 MazdaSpeed3 Spezifikationen PDF herunterladen (Seite 364)

Black plate (364,1)

1. Remove the battery cover from its front

side.

Battery cover

CAUTION

Ø Do not use a tool which applies

excessive force such as a

screwdriver or pliers.

Ø If excessive force is applied to the

clips, they could be dam aged.

Battery cover

Clip

2. Make sure the booster battery is 12 V

and that its negative terminal is

grounded.

3. If the booster battery is in another

vehicle, don't allow both vehicles to

touch. Turn off the engine of the

vehicle with the booster battery and all

unnecessary electrical loads in both

vehicles.

4. Connect the jumper cables in the exact

sequence as in the illustration.

l

Connect one end of a cable to the

positive terminal on the discharged

battery (1).

l

Attach the other end to the positive

terminal on the booster battery (2).

l

Connect one end of the other cable

to the negative terminal of the

booster battery (3).

l

Connect the other end to the ground

point indi cated in the illustration

away from the discharged battery

(4).

5. Start the engine of the booster vehicle

and run it a few minutes. Then start the

engine of the other vehicle.

6. When finished, carefully disconnect the

cables in the reverse order described in

the illustration.

NOTE

Verify that the covers are securely installed.

7-20

In Case of an Emergency

Emergency Starting

Mazda3_8AR3-EA-09E_Edition2 Page364

Monday, June 1 2009 1:18 PM

Form No.8AR3-EA-09E

1 2 ... 359 360 361 362 363 364 365 366 367 368 369 ... 499 500

Kommentare zu diesen Handbüchern

Keine Kommentare