Mazda 2014 2 Spezifikationen PDF herunterladen (Seite 494)

Black plate (494,1)

“Key not found” is displayed

This message is displayed when any of

the following operations is performed

with the key out of the operational range

or placed in areas inside the cabin where it

is difficult for the key to be detected.

l

The push button start is pressed with

the ignition switched off

l

The ignition is switched on

l

All doors are closed without switching

the ignition off

Type B

If any malfunction occurs in the keyless

entry system, it illuminates continuously.

CAUTION

If the key warning indicator light

illuminates or the push button start

indicator light (amber) flashes, the

engine may not start. If the engine

cannot be started, try starting it

using the emergency operation for

starting the engine, and have the

vehicle inspected at an Authorized

Mazda Dealer as soon as possible.

Refer to Emergency Operation for

Starting the Engine on page 4-8.

qIf the high beam control system

(HBC) warning light (amber)

flashes

í

This light flashes if there is a malfunction

in the high beam control system (HBC).

Have your vehicle inspected by an

Authorized Mazda Dealer.

qIf the traction control system

(TCS)/dynamic stability control

(DSC) indicator light illuminates

If the light stays on, the TCS, DSC or the

brake assist system may have a

malfunction and they may not operate

correctly. Take your vehicle to an

Authorized Mazda Dealer.

NOTE

l

In addition to the indicator light flashing, a

slight lugging sound will come from the

engine. This indicates that the TCS/DSC is

operating properly.

l

On slippery surfaces, such as fresh snow, it

will be impossible to achieve high rpm

when the TCS is on.

7-36

If Trouble Arises

í

Some models.

Warning/Indicator Lights and Warning Sounds

Mazda6_8DL2-EA-13F_Edition1 Page494

Monday, June 10 2013 3:56 PM

Form No.8DL2-EA-13F

1 2 ... 489 490 491 492 493 494 495 496 497 498 499 ... 573 574

Kommentare zu diesen Handbüchern

Keine Kommentare