Fi
. 13: Determinin
Differential Side Bearin
Preload Shims
Courtesy of MAZDA MOTORS CORP.
Fig. 14: Measuring Differential Side Bearing Preload
Courtesy of MAZDA MOTORS CORP.
BEARING PRELOAD (G15M-R/G25M-R)
1. Install primary and secondary shaft bearing outer races (with shims removed) into transaxle case. Mount
clutch housing onto transaxle hangar. Install differential bearing outer race into clutch housing, and tap
into place.
2. Remove primary and secondary shaft outer race from clutch housing. Remove differential bearing outer
race from transaxle case. Note selector arrangement. See Fig. 15 .
3. Install differential assembly into clutch housing. Install outer bearing race on differential bearing. Install
appropriate selector from Shim Selector Tool Set (49 G030 380D) on outer bearing race. Install selector
in primary and secondary outer bearing race bore. Place outer bearing races in selector and set shaft into
appropriate selector. Install transaxle case, spacers and bolts. Tighten bolts to specification. See
TORQUE SPECIFICATIONS .
4. Seat bearings by turning selector to widen measuring gap. See Fig. 16
. Turn selector with adjuster bars
until selector cannot be turned b
hand. Reverse direction to eliminate measurin
ap. Expand selector b
2003 Mazda Protege Mazdaspeed
2001-03 MANUAL TRANSMISSIONS Mazda F25M-R, G15M-R & G25M-R 5-Speed Overhaul
.
Thursday, April 26, 2007 7:00:21 AM Page 21 © 2005 Mitchell Repair Information Company, LLC.
Kommentare zu diesen Handbüchern