Mazda 2014 2 Spezifikationen PDF herunterladen (Seite 436)

Black plate (436,1)

4. Remove the windshield washer fluid

reservoir and bolts.

Windshield washer

fluid reservoir

Bolt

Guide

5. Remove the guide.

Guide

6. Disconnect the connector from the unit

by pressing the tab on the connector

with your finger and pulling the

connector downward.

7. Turn the socket and bulb assembly to

remove it. Carefully remove the bulb

from its socket in the reflector by

gently pulling it straight backward out

of the socket.

8. Install the new bulb in the reverse order

of the removal procedure.

Daytime running lights/Parking lights

(With xenon fusion headlights)

Due to the complexity and difficulty of

the procedure, the LED bulbs must be

replaced by an Authorized Mazda Dealer.

NOTE

LED bulb replacement is not possible because

it is built into the unit. Replace the unit.

Front turn signal lights/Front side-

marker lights, Parking lights (With

halogen headlights)

1. Make sure the ignition is switched off,

and the headlight switch is off.

2. If you are changing the right bulb, start

the engine, turn the steering wheel all

the way to the left, and turn off engine.

If you are changing the left bulb, turn

the steering wheel to the right.

6-44

Maintenance and Care

Owner Maintenance

Mazda6_8DL2-EA-13F_Edition1 Page436

Monday, June 10 2013 3:55 PM

Form No.8DL2-EA-13F

1 2 ... 431 432 433 434 435 436 437 438 439 440 441 ... 573 574

Kommentare zu diesen Handbüchern

Keine Kommentare