Mazda 2014 MAZDA2 Spezifikationen PDF herunterladen (Seite 115)

Black plate (115,1)

Setting the parking brake

Depress the brake pedal and then firmly

pull the parking brake lever fully upwards

with sufficient force to hold the vehicle in

a stationary position.

Releasing the parking brake

Depress the brake pedal and pull the

parking brake lever upwards, then press

the release button. While holding the

button, lower the parking brake lever all

the way down to the released position.

qBrake System Warning Light

This warning has the following functions:

Parking brake warnin g

The light illuminates when the parking

brake is applied with the ignition switched

to START or ON. It turns off when the

parking brake is fully released.

Low brake fluid level warning

If the light stays on after the parking brake

is fully released, you may have a brake

problem.

Brake system warning

í

Illuminates when there is a malfunction in

the brake switch.

Drive to the side of the road and park off

the right-of-way.

You may notice that the pedal is harder to

depress or that it may go closer to the

floor. In either case, it will take longer to

stop the vehicle.

1. With the engine stopped, open the

hood and check the brake fluid level

immediately, and then add fluid if

required (page 8-15).

2. After adding fluid, check the light

again.

If the warning light remains on, or if the

brakes do not operate properly, do not

drive the vehicle. Have it towed to an

Authorized Mazda Dealer.

Driving Your Mazda

Starting and Driving

5-7

í

Some models.

Mazda2_8CC7-EA-11H_Edition1 Page115

Tuesday, July 12 2011 2:7 PM

Form No.8CC7-EA-11H

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 343 344

Kommentare zu diesen Handbüchern

Keine Kommentare