Mazda 2014 MAZDA2 Spezifikationen PDF herunterladen (Seite 270)

Black plate (270,1)

3. Turn the screws and the center section

of the plastic retainers

counterclockwise and remove them,

then partially peel back the mudguard.

Removal

Installation

4. Turn the socket and bulb assembly

counterclockwise and remove it.

5. Disconnect the bulb from the socket.

6. Install the new bulb in the reverse order

of removal.

Side turn signal lights

1. Make sure the ignition is switched off

and the headlight switch is off.

2. Slide the unit as shown in the figure to

remove it.

3. Detach the electrical connector from

the unit by pulling it outward.

4. Install the new side turn signal unit in

the reverse order of removal.

NOTE

Bulb replacement is not possible because it is

built into the unit. Replace the unit.

8-36

Maintenance and Care

Owner Maintenance

Mazda2_8CC7-EA-11H_Edition1 Page270

Tuesday, July 12 2011 2:8 PM

Form No.8CC7-EA-11H

1 2 ... 265 266 267 268 269 270 271 272 273 274 275 ... 343 344

Kommentare zu diesen Handbüchern

Keine Kommentare