Mazda B4000 Spezifikationen PDF herunterladen (Seite 205)

• NEVER decrease the coolant concentration below 40%.

• Engine coolant concentrations above 60% or below 40% will

decrease the freeze protection characteristics of the engine

coolant and may cause engine damage.

Plain water may be added in an emergency, but you must replace it with

a 50/50 mixture of engine coolant and distilled water as soon as possible.

Check the coolant level in the reservoir before you drive your vehicle the

next few times (with the engine cool). If necessary, add a 50/50

mixture of engine coolant and distilled water to the engine coolant

reservoir until the coolant level is at the “cold fill level” or within the

“cold fill range” as listed on the reservoir (depending upon application).

Have your dealer check the engine cooling system for leaks if you have

to add more than 1.0 liter (1.0 quart) of engine coolant per month.

WARNING: To avoid scalding hot steam or coolant from being

released from the engine cooling system, never remove the

reservoir cap while the engine is running or hot. Failure to

follow this warning may result in damage to the engine’s cooling

system and possible severe personal injury.

If you must remove the coolant cap, follow these steps to avoid personal

injury:

1. Before you remove the cap, turn the engine off and let it cool.

2. When the engine is cool, wrap a thick cloth around the cap. Slowly

turn cap counterclockwise until pressure begins to release.

3. Step back while the pressure releases.

4. When you are sure that all the pressure has been released, use the

cloth to turn it counterclockwise and remove the cap.

Recycled engine coolant

Not all coolant recycling processes produce coolant which meets Mazda

specification. Use of a recycled engine coolant which does not meet

Mazda specifications may harm engine and cooling system components.

Always dispose of used automotive fluids in a responsible manner.

Follow your community’s regulations and standards for recycling and

disposing of automotive fluids.

Coolant refill capacity

To find out how much fluid your vehicle’s cooling system can hold, refer

to Refill capacities in this chapter.

Maintenance and Specifications

205

1 2 ... 200 201 202 203 204 205 206 207 208 209 210 ... 255 256

Keine Kommentare

Mazda B4000 Spezifikationen Seite 205