Mazda 2002 B2300 Spezifikationen PDF herunterladen (Seite 138)

5. To put the retractor in the

automatic locking mode, grasp

the shoulder portion of the belt

and pull downward until all of

the belt is extracted and a click

is heard.

6. Allow the belt to retract. The belt will click as it retracts to indicate

it is in the automatic locking mode.

7. Pull the lap belt portion across

the child seat toward the buckle

and pull up on the shoulder belt

while pushing down with knee

on the child seat.

8. Allow the safety belt to retract

to remove any slack in the belt.

9. Before placing the child in the

seat, forcibly tilt the seat

forward and back to make sure

the seat is securely held in

place. To check this, grab the

seat at the belt path and

attempt to move it side to side

and forward. There should be

no more than one inch of

movement for proper installation.

10. Try to pull the belt out of the retractor to make sure the retractor is

in the automatic locking mode (you should not be able to pull more

belt out). If the retractor is not locked, unbuckle the belt and repeat

steps two through nine.

Check to make sure the child seat is properly secured before each use.

Seating and Safety Restraints

138

1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 287 288

Keine Kommentare

Mazda 2002 B2300 Spezifikationen Seite 138