Mazda 2010 MX-5 Miata Spezifikationen PDF herunterladen (Seite 186)

Black plate (186,1)

qTires and Wheels

CAUTION

When inspecting or adjusting the tire

air pressures, do not apply excessive

force to the stem part of the wheel

unit. The stem part could be

damaged.

Changing tires and wheels

The foll owing procedure allows the

TPMS to recognize a tire pressure sensor's

unique ID signal code whenever tires or

wheels are changed, such as changing to

and from winter tires.

NOTE

Each tire pressure sensor has a unique ID

signal code. The signal code must be

registered with the TPMS before it can work.

The easiest way to do it is to have an

Authorized Mazda Dealer change your tire and

complete ID signal code registration.

When having tires changed at an

Authorized Mazda Dealer

Tire pressure sensor ID signal code

registration is completed when an

Authorized Mazda Dealer changes your

vehicle's tires.

When changing tires yourself

If you or someone else changes tires, you

or someone else can also undertake the

steps for the TPMS to complete the ID

signal code registration.

1. After tires have been changed, turn the

ignition switch to the ON position, then

turn it back to the ACC or LOC K

position.

2. Wait for about 15 minutes.

3. After about 15 minutes, drive the

vehicle at a speed of at least 25 km/h

(16 mph) for 10 min utes and the tire

pressure sensor ID signal code will be

registered automatically.

NOTE

If the vehicle is driven within about 15 minutes

of changing tires, the tire pressure monitoring

system warning light will flash because the

sensor ID signal code would not have been

registered. If this happens, park the vehicle for

about 15 minutes, after which the sensor ID

signal code will register upon driving the

vehicle for 10 minutes.

Replacing tires and wheels

CAUTION

Ø When replacing/repairing the tires

or wheels or both, have the work

done by an Authorized Mazda

Dealer, or the tire pressure sensors

may be damaged.

Ø The wheels equipped on your

Mazda are specially designed for

installation of the tire pressure

sensors. Do not use non-genuine

wheels, otherwise it may not be

possible to install the tire pressure

sensors.

Be sure to have the tire pressure sensors

installed whenever tires or wheels are

replaced.

When having a tire or wheel or both

replaced, the following types of tire

pressure sensor installations are possible.

l

The tire pressure sensor is removed

from the old wheel and installed to the

new one.

l

The same tire pressure sensor is used

with the same wheel. Only the tire is

replaced.

5-34

Driving Your Mazda

Starting and Driving

MX-5_8AV1-EA-09F_Edition2 Page186

Thursday, July 30 2009 2:44 PM

Form No.8AV1-EA-09F

1 2 ... 181 182 183 184 185 186 187 188 189 190 191 ... 445 446

Kommentare zu diesen Handbüchern

Keine Kommentare