Mazda 2010 MX-5 Miata Spezifikationen PDF herunterladen (Seite 325)

Black plate (325,1)

1. Remove the rubber hose from the

battery cover.

2. Remove the battery cover from its right

side.

3. Make sure the booster battery is 12 V

and that its negative terminal is

grounded.

4. If the booster battery is in another

vehicle, don't allow both vehicles to

touch. Turn off the engine of the

vehicle with the booster battery and all

unnecessary electrical loads in both

vehicles.

5. Connect the jumper cables in the exact

sequence as in the illustration.

l

Connect one end of a cable to the

positive terminal on the discharged

battery (1).

l

Attach the other end to the positive

terminal on the booster battery (2).

l

Connect one end of the other cable

to the negative terminal of the

booster battery (3).

l

Connect the other end to the ground

point indi cated in the illustration

away from the discharged battery

(4).

6. Start the engine of the booster vehicle

and run it a few minutes. Then start the

engine of the other vehicle.

7. When finished, carefully disconnect the

cables in the reverse order described in

the illustration.

8. If the battery cover has been removed,

install it in the reverse order of

removal.

In Case of an Emergency

Emergency Starting

7-23

MX-5_8AV1-EA-09F_Edition2 Page325

Thursday, July 30 2009 2:46 PM

Form No.8AV1-EA-09F

1 2 ... 320 321 322 323 324 325 326 327 328 329 330 ... 445 446

Kommentare zu diesen Handbüchern

Keine Kommentare